The Righteous Stunt Clutch is the finest easy-pull style clutch assembly in the world. The RSC is milled completely out of 6061 billet aluminum. While having a design very similar to other easy-pull style clutches on the market, the Righteous Stunt Clutch incorporates a few key improvements that make it virtually bulletproof.

The three cable positions usually found on an easy-pull style lever are eliminated, leaving only the one "easiest" pull setting. The swivel adjuster on the perch has also been eliminated, leaving you with a unit that is made out of MUCH stronger material with a much more straightforward design. We have eliminated ALL of the weak points of the competing easy-pull assemblies, and have also closed up many of the SLOPPY tolerances found in them.

The perch has been designed with a rear-mounting cap, which is also a much stronger design than the competition. The perch cap is also designed to be mounted flush on top, eliminating the unsightly "gap" found in most rear mounting assemblies. The ENTIRE unit is actually thicker and beefier than the competition, while still keeping in mind the tight tolerance we encounter around our handbrakes as stunters.

The basic Righteous Stunt Clutch comes with a Delrin bushing pressed into the lever. Delrin is an excellent material used in many bushing applications. Delrin also has a "self lubricating" quality to it, similar to Teflon. The RSC was designed around the Delrin bushing due to its durability and honestly, its incredible performance. The Delrin bushing provides an extremely buttery feel, without giving up strength. We also offer the RSC Ultimate, which has a needle bearing in place of the Delrin bushing, just for you guys out there that have a hard time believing that a bushing can compete with a bearing.

The RSC is available with either a "shorty" lever or a full-length lever. The shorty lever is ideal for true one finger operation, while the full-length lever allows 2-3 finger operation. If running an RSC in conjunction with a handbrake, there are two common setups. Most stunters run their clutch on the outside of their handbrake, closer to the end of the handlebar. If this is your preferred method, you’d probably be best running the shorty lever option. If you like to run your clutch on the inside, closer to the fork tube, you’d most likely want the full length option. I will be releasing a "full length and then some" lever w/ in the next month or two. It will be about an inch longer than the current full-length lever.

The Righteous Stunt Clutch comes equipped with a lever adjustment screw, which helps to customize your setup to your personal preferences. I will also be releasing an RSC spacer kit within the next month or two. This spacer kit will position the RSC 6mm further out from the bar, allowing more adjustment and more room for you guys with big hands or long fingers. The spacer kit will retail for around $15.

The RSC also comes in three standard finishes. The basic RSC comes with a bead-blasted finish. Then we also offer a polished version known as the "Bling" edition. And last, but not least...we offer three colors of anodizing. The anodized models take a trip to the bead-blasting cabinet prior to seeing the anodizer. This gives them a very unique, textured look that is also very durable. Anodizing is offered in black, blue, and red.

The RSC is assembled using all stainless steel hardware. It also comes pre-lubed, ready for installation. All orders are shipped via USPS Priority Mail w/ delivery confirmation. Domestic orders can expect their RSC within a week, while international orders can take up to 2-3 weeks. USPS does NOT offer tracking on Priority mail shipments.